|
|
 |
| |
|
|
| |
The logistic and repair process is the most under estimated part of a leakage management program. It is obviously the single most important factor of the whole process. If leakages are not fixed you are simply not going to achieve cost reductions. Many companies will go to great length to invest in ultra-sonic equipment or other methods and overlook the fact that the leakages require an organised system of repair. It is possible that you have an excellent preventative maintenance system or superb control of your repair actions but this unfortunately does not mean that it is the most effective means of managing the leakage repair process. Managing the leakage repair process requires a different approach. Normally companies do no have the time to adapt a system to the demands of a comprehensive leakage management program. The LeekSeek™ system is has been developed to minimise project time, provide cost and volume information. An important part of that process is solving the logistic and repair process for our clients.
LeekSeek™ has a wide network of service and logistic partners. These partners work closely with LeekSeek™ to provide turn key solutions to leakage detection, from discovery of the leakage until it is repaired and verified. A leakage detection survey will often reveal hundreds or sometimes thousands of leakages. Each of these leakages is associated with some suggested remedial action. It could be anything from a very simple re-sealing of threads on a quick coupling to a leakage that is very complex that requires extensive pneumatic know-how. In many plants the logistical process becomes a time consuming and costly process. Many parts that need to be replaced could be old or obsolete making their identification and replacement very difficult. An equivalent part has to be suggested and that could involve purchasing parts and components from quite a number of manufacturers or sources. Many parts may be standard and easier to identify but each part is also linked to a specific leakage, department, workplace and perhaps machine, and has to be put in place. For a successful project it is vital that this process is managed correctly. LeekSeek™ uses service and logistic partners in this process. They are experts in pneumatics and have in-depth knowledge of parts and in finding their equivalents. A service partner is a company that is certified to use the LeekSeek™ system and will not only assist you to identify the parts you require but will also have the ability to have them professionally repaired and provide you with verification. LeekSeek™ logistic partners are in-valuable in the repair process as they will efficiently help you source the parts, consolidate shipments, label the material and make sure it arrives on site and in time. Service and logistic partners make significant contributions in reducing your logistic costs and minimising project time. LeekSeek™ is continuously looking for new service and logistic partners. Contact us for further details. |
|
| |
|
|
|
|
